Skip to main content
Search
Southern Illinois University Edwardsville Logo
Apply to SIUE
Mechanical Engineering - Faculty and Staff

Mechanical and Mechatronics Engineering Sub MenuDismiss

  News & Announcements Undergraduate Programs Graduate Programs Faculty & Staff Laboratories & Research Student Involvement

Faculty & Staff

School of Engineering Mechanical and Mechatronics Engineering Faculty & Staff

Dr. Jeff Darabi - Professor

Publications

Journal Articles

  1. Rojo, G., Ghanbari S., and Darabi, J Fabrication and Thermal Characterization of Composite Cu-CNT Micropillars for Capillary-driven Phase-Change Cooling Devices, Nanoscale and Microscale Thermophysical Engineering, 23:4, 317-333, (2019) DOI:10.1080/15567265.2019.1675830
  2. Kazemi, B. and Darabi, J., Numerical simulation of dielectrophoretic particle separation using slanted electrodes, Physics of Fluids 30, 102003 (2018); doi: 10.1063/1.5047153
  3. Alam, M., Golozar, M., and Darabi, J., Modeling and simulation of particle-particle interaction in a magnetophoretic bioseparation chip, Physics of Fluids 30, 042001 (2018); doi: 10.1063/1.5022582
  4. Golozar, M., Molki, M., Darabi, J., Computational and performance analysis of a continuous magnetophoretic bioseparation chip with alternating magnetic fields, J. Microfluid Nanofluid (2017) 21: 73. https://doi.org/10.1007/s10404-017-1909-4.
  5. Darabi, J. and C. Guo, Continuous isolation of monocytes using a magnetophoretic-based microfluidic Chip, Biomedical Microdevices, 18 (5), 1-10 (2016), DOI 10.1007/s10544-016-0105-8.
  6. Gholami Derami, H, Vundavilli, R., Darabi, J., Experimental and computational study of gas bubble removal in a microfluidic system using nanofibrous membranes, Microsystem Technologies (2016), DOI 10.1007/s00542-016-3020-2
  7. Ghanbari, S. and Darabi, J., Fabrication and Material Characterization of Copper and Copper-CNT Micropillars, Mater. Res. Express 2 (2015) 075501.
  8. Hale, C. and Darabi, J., Magnetophoretic-based microfluidic device for DNA isolation, Biomicrofluidics 8, 044118 (2014); doi:10.1063/1.4893772.
  9. Ghajar, M. and Darabi, J., Evaporative Heat Transfer Analysis of a Micro Loop Heat Pipe with Rectangular Grooves, International Journal of Thermal Sciences, 79 (2014), 51–59.
  10. Darabi, J. and C. Guo, On-chip magnetophoretic isolation of CD4+T cells from blood, Biomicrofluidics 7, 054106 (2013); doi: 10.1063/1.4821628.
  11. Sen, A K, Darabi, J, Knapp, D R, Aerosol formation in electrospray ionization using a microfluidic emitter, IEEE Sensors Journal, 11 (2011) 2335-2341.
  12. Sen, A K, Darabi, J, Knapp, D R, Analysis of droplet generation in electrospray using a carbon fiber based microfluidic emitter, ASME J Fluids Engineering, 133 (2011) 1-8.
  13. Sen, A K, Darabi, J, Knapp, D R, A fluidic interconnection system for polymer based microfluidic devices, Microsystem Technologies, 16 (2010), 617-623.
  14. Sen, A K, Darabi, J, Knapp, D R, Design, fabrication and test of a microfluidic nebulizer chip for desorption electrospray ionization mass spectrometry, Sensors and Actuators B,137 (2009), 789-796.
  15. Sen, A K, Nayak, R, Darabi, J, and D. R. Knapp, Use of nanoporous alumina surface for desorption electrospray ionization mass spectrometry in proteomic analysis, Biomedical Microdevices, 10 (2008) 531-538.
  16. Sen, A K, Darabi, J, Modeling and Optimization of a Microscale Capacitive Humidity Sensor for HVAC Applications, IEEE Sensors Journal, 8 (2008) 333-340.
  17. Crews, N., Darabi, J., P. Voglewede, F. Guo, A. Bayoumi, An analysis of interdigitated electrode geometry for dielectrophoretic particle transport in micro-fluidics, Sensors and Actuators B 125 (2007) 672–679.
  18. Sen, A K, Darabi, J, D R Knapp, Simulation and parametric study of a novel multi-spray emitter for ESI- MS applications, Microfluidics and Nanofluidics, 3 (2007) 283–298.
  19. Sen, A K and Darabi, J, Droplet ejection performance of a monolithic thermal inkjet print head, Micromech. Microeng. 17 (2007) 1420–1427.
  20. Darabi, J. and Rhodes, C., CFD Modeling of an Ion-Drag Micropump, Journal of Sensors and Actuators A, 127 (2006) 94-103.
  21. Sen, A K., Darabi, J, Knapp, D. R. and J. Liu, Modeling and characterization of a carbon fiber emitter for electrospray ionization, Micromech. Microeng. 16 (2006) 620-630.
  22. Darabi, J., Wang, H., Development of an Electrohydrodynamic Injection Micropump and Its Potential Application in Pumping Fluids in Cryogenic Cooling Systems, Journal of Microelectromechanical Systems, 14 (2005) 747-755.
  23. Ghajar, M. and Darabi, J., Numerical Modeling of Evaporator Surface Temperature of a Micro Loop Heat Pipe at Steady-state Condition, Micromech. Microeng. 15 (2005) 1963-1971.
  24. Ghajar, M., Darabi, J., Crews, N., A Hybrid CFD-Mathematical Model for Simulation of a MEMS Loop Heat Pipe for electronics cooling applications, Micromech. Microeng., 15 (2005) 313-321.
  25. J., 2004, An Analytical Model for EHD-enhanced Microscale Thin-film Evaporation, Journal of Heat Transfer Engineering, 24 (2004), pp. 14-22.
  26. Darabi, J., and K. Ekula, Development of a Chip-integrated Micro Cooling device, Microelectronics Journal, 34 (2003) 1067–1074.
  27. Darabi, J., Rada, M., Ohadi, M.M. and Lawler, J., Design, Fabrication, and Testing of an Electrohydrodynamic Ion-Drag Micropump, Journal of Microelectromechanical Systems, 11 (2002) 684-690.
  28. Darabi, J., Micro- and Nanoscale Heat transfer: Challenges and Opportunities, Heat Transfer Engineering, Editorial, 23 (2002) 1-2.
  29. Darabi, J., Ohadi, M.M., and DeVoe, D., An Electrohydrodynamic Polarization Micropump for Electronic Cooling, Journal of Microelectromechanical Systems, 10 (2001) 98-106.
  30. Darabi, J., Ohadi, M.M., and Dessiatoun, S. V., Falling Film and Spray Evaporation Using Electric Fields, Journal of Heat Transfer, 122 (2000) 741-748.
  31. Darabi, J., Ohadi, M.M., and Dessiatoun, S.V., Compound Augmentation of Pool Boiling on Three Selected Commercial Tubes, Journal of Enhanced Heat Transfer, 7 (2000) 347-360.
  32. Darabi, J., Ohadi, M.M., and Dessiatoun, S. V., Augmentation of Thin Falling-Film Evaporation on Horizontal Tubes Using an Applied Electric Field, Journal of Heat Transfer, 122 (2000) 391-398.
  33. Darabi, J., Ohadi, M.M., Faani, M.A., and Kedzierski, M., Effect of Heating Boundary Conditions on Pool Boiling Experiments, International Journal of HVAC&R Research, Vol. 5 (1999) 283-296.

 

Book Chapters

  1. Ohadi, M.M., Darabi, J., and Roget, B., Electrode Design, Fabrication, and Materials Science for EHD-Enhanced Heat and Mass Transport, Annual Review of Heat Transfer, Edited by C.L. Tien, Begell House, Inc, New York, Vol. XI (2001) 563-632.
  2. Ohadi, M.M., Dessiatoun, S.V., Darabi, J., and Salehi, M., Active Augmentation of Single-Phase and Phase-Change Heat Transfer, Process, Enhanced and Multi-phase Heat Transfer, Eds. R.M. Manglik and A.D. Kraus, Begell House, New York (1996) 277-286.

 

Conference Proceedings

  1. Jackson S., Darabi, J., Schober, J., Fabrication and Testing of a Magnetophoretic Bioseparation Chip for Isolation and Detection of Circulating Tumor Cells from Peripheral Blood, Proceedings of the ASME-JSME-KSME 2019 Joint Fluids Engineering Conference AJKFLUIDS2019 July 28-August 1, 2019, San Francisco, CA, USA.
  2. Kazemi, B. and Darabi, J., Numerical Simulation of Dielectrophoretic Particle Separation, FEDSM2018-83413, Proceedings of the ASME 2018 5th Joint US-European Fluids Engineering Summer Conference FEDSM2018, July 15-20, 2018, Montreal, Quebec, Canada.
  3. Hale, C. and Darabi, J., Computational Analysis of a Microfluidic Magnetophoretic Device for DNA Isolation, FEDSM2018-83482, Proceedings of the ASME 2018 5th Joint US-European Fluids Engineering Summer Conference FEDSM2018, July 15-20, 2018, Montreal, Quebec, Canada.
  4. Ghanbari, S. and Darabi, J., Fabrication and Thermal Characterization of Novel Copper-CNT Micropillars for Electronics Cooling Applications, HT2017-4935, ASME 2017 Summer Heat Transfer Conference, July 9-14, 2017, Bellevue, Washington, USA.
  5. Alam, M. and Darabi, J., Dipole-Dipole Interaction between Particle Complexes in a Magnetophoretic Bioseperation Chip, ICNMM2016-8030, ASME 2016 14th International Conference on Nanochannels, Microchannels, and Minichannels.
  6. Jackson, S.; Darabi, J.; Schober, J. A Magnetophoretic Chip for Detection of Circulating Tumor Cells from Peripheral Blood, ICNMM2016-8082, ASME 2016 14th International Conference on Nanochannels, Microchannels, and Minichannels.
  7. Byers, A. and Darabi, J., Capillary flow characteristics of a novel micropillar array for applications in capillary-driven two-phase cooling systems, 2016 15th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm).
  8. Golozar, M.; Darabi, J.; Molki, M., Numerical Simulation and Performance Optimization of a Magnetophoretic Bio-separation chip, APS March Meeting 2016, abstract #K53.014.
  9. Darabi, J. and C. Guo, A Microfluidic Device for Continuous Magnetophoretic Isolation of Monocytes, ASME 2015 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems and International Conference on Nanochannels, Microchannels, and Minichannels, InterPACKICNMM2015, July 6-9, 2015, San Francisco, California, USA.
  10. Gholami Derami H., Darabi, J., Computational and experimental study of gas bubbles removal in a microfluidic system, ASME 2015 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems and International Conference on Nanochannels, Microchannels, and Minichannels, InterPACKICNMM2015, July 6-9, 2015, San Francisco, California, USA.
  11. Darabi, J. and C. Guo, A Microfluidic Device for Isolation of Human Monocytes, 1st International Conference on Micro & Nanofluidics, 18-21 May 2014, University of Twente - The Netherlands.
  12. Vundavilli, R. and Darabi, J., Bubble Removal in Microfluidic Devices Using Nanofibrous Membranes, FEDSM2014-21616, Proceedings of the ASME 2014 4th Joint US-European Fluids Engineering Division Summer Meeting and 12th International Conference on Nanochannels, Microchannels, and Minichannels FEDSM2014 August 3-7, 2014, Chicago, Illinois, USA
  13. DeProw, K. and Darabi, J., Motion and Deformation of a Water Droplet under the Influence of an Electric Field, FEDSM2014-21654, Proceedings of the ASME 2014 4th Joint US-European Fluids Engineering Division Summer Meeting and 12th International Conference on Nanochannels, Microchannels, and Minichannels FEDSM2014 August 3-7, 2014, Chicago, Illinois, USA
  14. Darabi J., High Performance Microfluidic-Based DNA Isolation Chip, SBC2013-14522, Summer Bioengineering Conference, June 26-29, 2013, Sunriver, Oregon.
  15. Ghajar M. and Darabi, J., Modeling of heat transfer characteristics of rectangular microgrooves in evaporators, AIAA paper 2007-4154, Miami, Florida, 2007.
  16. Sen, A K, Darabi, J, Numerical Investigations of the Jet Breakup Regime of Electrospray Ionization Using a Carbon Fiber Emitter, 2007 ASME International Mechanical Engineering Congress, IMECE2007-41320, November 11-15, Seattle, Washington, 2007.
  17. Sen, A K, Darabi, J, Nayak, R, Knapp D R, Desorption Electrospray Ionization Using a Porous Alumina Surface, Proceedings of the ASME 2007 Summer Bioengineering Conference (SBC2007), BIO2007- 176016 June 20-24, Keystone, Colorado, USA.
  18. Ghajar, M and Darabi J, Integration of A Thin-Film Evaporation Submodel With a Micro Loop Heat Pipe Solver, 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006-14730, Chicago, Illinois, November 5-10, 2006.
  19. Floyd, D.E., Topolski. M.T., and Darabi, J., Design and Evaluation of Copper Metal Foams in Cold Plates, 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006-14897, Chicago, Illinois, November 5-10, 2006.
  20. Sen, A K, Darabi, J, and Knapp D R., Modeling of a Novel Multi-Jet Emitter for ESI-MS Applications, 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006-14401, Chicago, Illinois, November 5-10, 2006.
  21. Sen, K., Darabi, J., D. R. Knapp, EHD Modeling of a Novel Carbon Fiber Emitter for Electrospray Ionization-Mass Spectrometry Applications, 2006 Summer Bioengineering Conference, Proceedings of BIO2006, June 21-25, Amelia Island Plantation, Amelia Island, Florida.
  22. Ghajar, M. and Darabi, J., Simulation of Steady State Surface Temperature Response of a Novel Micro Loop Heat Pipe to Various Heat Loads, 2005 ASME Summer Heat Transfer Conference, July 17-22, 2005, San Francisco, California.
  23. Ghajar, M., Darabi, J., and Crews, N., A Hybrid CFD-Mathematical Model for Simulation of a MEMS Loop Heat Pipe, 2004 ASME International Mechanical Engineering Congress, IMECE2004-61516, Anaheim, California, November 13-19, 2004.
  24. Darabi, J., Wang, H., Development of an Electrohydrodynamic Injection Micropump for Cryogenic Cooling, Paper # 44247, Proceedings of IMECE2003 ASME International Mechanical Engineering Congress & Exposition, Washington, D.C., 2003.
  25. Darabi, J, and Bayoumi, A., The Use of MEMS/NEMS Technology for Biomedical Applications, Proceeding of MDP-8, Cairo University Conference on Mechanical Design and Production, Cairo, Egypt, January 4-6, 2004.
  26. Darabi, J., Chowdhury, S., Ohadi, M.M., Lawler, J., A Source-Integrated Micro Cooling System, Proceedings of the 6th ASME-JSME Thermal Engineering Joint Conference, TED-AJ03-131, March 16-20, 2003, Hawaii Island, Hawaii.
  27. Darabi, J., 2003, MEMS Opportunities and Their Increasing Potential in Thermal Management of Electronics, ASHRAE winter Meeting, January 25-29, 2003, Chicago, Illinois.
  28. Darabi, J., Wang, H., Emerging Opportunities and Challenges in Micropumps, Proceedings of IMECE2002 ASME International Mechanical Engineering Congress & Exposition, IMECE2002-39586, New Orleans, Louisiana, 2002.
  29. Chowdhury, S., Darabi, J., Ohadi, M.M., and J. Lawler, Chip-integrated Micro Cooling Systems, Proceedings of the Thermal Challenges in Next Generation Electronic Systems Conference, Santa Fe, New Mexico, 2002.
  30. Rada, M., Darabi, J., Ohadi, M.M., and J. Lawler, Electrohydrodynamic Pumping of Liquid Nitrogen using a mesoscale ion-drag pump, Proceedings of the 36th Intersociety Energy Conversion Engineering Conference, Savannah, GA, 2001.
  31. Mo, B., Ohadi, M.M., Dessiatoun, S., Darabi, J, Development of the Semi-Empirical Correlations for an EHD-Enhanced CPL, 11th Annual Spacecraft Thermal Control Technology Workshop, Spacecraft thermal Control Technology Workshop, El Segundo, California, 2000.
  32. Darabi, J., Ohadi, M.M., and Dessiatoun, S.V., Augmentation of Thin Falling-Film Evaporation on Horizontal Tubes Using an Applied Electric Field, Compact Heat exchangers and Enhancement technology for the Process Industries Conference, July 18 - 22, Banff, Canada, 1999.
  33. Ohadi, M.M., and Dessiatoun, S. V, and Darabi, J., and Baumgarten, B., 1999, High Temperature Heat Exchangers--Emerging Opportunities and Challenges, Proceedings, 2nd Int. High Temperature Air Combustion (HTAC) Symposium, January 20-22, Kaohsiung, Taiwan, Paper No. A-2, 1-10, 1999.
  34. Darabi, J., Ohadi, M.M., and Dessiatoun, S.V., Falling Film and Spray Evaporation Enhancement Using Electric Fields, Proceedings of the 5th ASME/JSME Joint Thermal Engineering Conference, San Diego, CA, AJTE99-6248, 1999.
  35. Zhao, Y., Ohadi, M.M., Dessiatoun, S.V., Molki, M., and Darabi, J., Forced Convection Heat Transfer of CO2 in Horizontal Tubes, Proceedings of the 5th ASME/JSME Joint Thermal Engineering Conference, San Diego, CA, AJTE99-6249, 1999.
  36. Darabi, J., Ohadi, M.M., and Dessiatoun, S.V., Heat Transfer Enhancement with Falling Film Evaporation on Vertical Tubes Using Electric Fields, Proceedings of the International Mechanical Engineering Congress and Exposition, HTD-361-1, Vol.1 (1998) 331-38.
  37. Zhao, Y., Ohadi, M.M, Dessiatoun, S.V., Radermacher, R., and Darabi, J., Evaporation Heat Transfer Coefficients of Ammonia and Co2 Inside a Smooth Tube," International conference on Heat Transfer issues in Natural refrigerants, November 6 and 7, (1997) 93-107.
  38. Darabi, J., Salehi, M., Saeedi M.H., and Ohadi, M.M., Review of available correlations for prediction of flow boiling heat transfer in smooth and augmented tubes, ASHRAE Transaction, 101 (1995) 225-235.
© 2024  SIUE, Edwardsville, IL 62026 Contact SIUE Privacy Notice | Consumer Disclosures & Complaints Equal Opportunity Employer Employment Emergency Notification (e-Lert)

Southern Illinois University Edwardsville is authorized to operate as a postsecondary educational institution by the  Illinois Board of Higher Education.